Vertical and horizontal milling machines / PHOEBUS

Vertical milling machine Phoebus PBM 2VS

• X axis travel 725 mm
• Y axis travel 305 mm
• Z axis travel 406 mm
• Spindle nose Iso 30
• X-Y axis with power table feeds “ALIGN POWER”

Milling machine Phoebus model 2VS is a machine extremely poured them in how much complete one of fast head to continuous variation that them concurs an application field much immense one.

Vertical milling machine Phoebus PBM 4VSL

• X axis travel 880 mm
• Y axis travel 400 mm
• Z axis travel 450 mm
• Spindle nose Iso 40
• Hardened and ground guideways with covering of Turcite

It’s constructed in mechanical cast iron. The advances of the X and Y axis are set in action to you from independent motors to continuous variation Align. Z axis feed is set with electric motor with gear box. All the sliding parts are lubricated by means of one hydraulic pump.

The head has the spin possibility in order to execute slanted perforations or borings and the variation of the turns of the spindle is continuous.

Vertical milling machine Phoebus PBM 4EVSL with inverter head

• X axis travel 880 mm
• Y axis travel 400 mm
• Z axis travel 450 mm
• Spindle taper Iso 40
• It is made of mechanical cast iron and has square, tempered and precision ground sliding guides
• The feeds of the X and Y axes are driven by independent Align continuous variation motors
• The feed of the Z axis is driven by an electric motor and gearbox
• All the sliding parts are lubricated by a hydraulic control unit
• The head has the possibility of rotation to perform inclined drill or boring and the variation of the spindle revolutions is continuous

The Phoebus 4EVSL milling machine is an extremely versatile machine as it is complete with a fast change head continuous via inverter that allows a very wide field of application.

Vertical milling machine Phoebus EVS300AL with inverter head

• X axis travel 1150 mm
• Y axis travel 390 mm
• Z axis travel 510 mm
• Spindle taper Iso 40
• It’s constructed in mechanical cast iron and has the sliding square guides, hardened and rectified of precision
• All the sliding parts are lubricated by means of hydraulic device exchange
• The head has the spin possibility in order to execute slanted perforations or borings and the variation of the turns of the spindle is continuous

Read more »

Vertical and horizontal milling Phoebus GEVS300AL with inverter head

• X axis travel 1200 mm
• Y axis travel 393 mm
• Z axis travel 535 mm
• Spindle taper Iso 40
• All the sliding parts are lubricated by means of hydraulic device exchange
• It’s constructed in mechanical cast iron and has the sliding square guides, hardened and rectified of precision

Milling machine Phoebus model GEVS is a machine extremely poured them in how much complete one of fast head to continuous variation through inverter that them immense one concurs an application field much. Moreover with the horizontal spindle it covers all the requirements in the field of the milling.

The advance of the axis longitudinal and cross is set in action from motors with inverter Yaskawa and regulated to you from a hand wheel so as to to take advantage of the variation possibility it graduates them of the same advances. The lives of the advances longitudinal and cross are to ball screw obtaining therefore the cancellation of the games that have the traditional lives. The screw of the vertical advance is trapezial.

The head has the spin possibility in order to execute slanted perforations or borings and the variation of the turns of the spindle is continuous.

Vertical milling machine Phoebus PBM EVS500A with inverter head

• X axis travel 1150 mm
• Y axis travel 540 mm
• Z axis travel 385 mm
• Right-left 90° head inclination
• Ball bearing screws on X and Y axis
• 360° Ram rotation
• Automatic centralized lubrication
• Chips coolant tank
• Quick pneumatic draw bar for clamping tool
• Hydropneumatic support for continuous Z axis use. (Optional available on all EVS models)
• YASKAWA original X, Y and Z axis servomotors and drives: the motor and the Z axis drive make it in effect a real work axis

Vertical and Horizontal milling machine Phoebus PBM GEVS500A with vertical inverter head

• X axis travel 1200 mm
• Y axis travel 540 mm
• Z axis travel 380 mm
• Vertical & Horizontal spindle
• Right-left 90° head inclination
• Ball bearing screws on X and Y axis
• 360° Ram rotation
• Automatic centralized lubrication
• Chips coolant tank
• Hydropneumatic support for continuous Z axis use. (Optional available on all EVS models)
• YASKAWA original X, Y and Z axis servomotors and drives: the motor and the Z axis drive make it in effect a real work axis
• Quick pneumatic draw bar for clamping tool (vertical spindle), available on request also for the horizontal spindle only for the GEVS600A model

Read more »

Vertical milling machine Phoebus PBM EVS600A with inverter head

• X axis travel 1200 mm
• Y axis travel 650 mm
• Z axis travel 455 mm
• Right-left 90° head inclination
• Ball bearing screws on X and Y axis
• 360° Ram rotation
• Automatic centralized lubrication
• Chips coolant tank
• Quick pneumatic draw bar for clamping tool
• Hydropneumatic support for continuous Z axis use. (Optional available on all EVS models)
• YASKAWA original X, Y and Z axis servomotors and drives: the motor and the Z axis drive make it in effect a real work axis

Vertical and Horizontal milling machine Phoebus PBM GEVS600A with vertical inverter head

• X axis travel 1200 mm
• Y axis travel 650 mm
• Z axis travel 455 mm
• Vertical & Horizontal spindle
• Right-left 90° head inclination
• Ball bearing screws on X and Y axis
• 360° Ram rotation
• Automatic centralized lubrication
• Chips coolant tank
• Hydropneumatic support for continuous Z axis use. (Optional available on all EVS models)
• YASKAWA original X, Y and Z axis servomotors and drives: the motor and the Z axis drive make it in effect a real work axis
• Quick pneumatic draw bar for clamping tool (vertical spindle), available on request also for the horizontal spindle only for the GEVS600A model

Universal milling machine Phoebus HU 300

• X axis travel 1200 mm
• Y axis travel 393 mm
• Z axis travel 450 mm
• YASKAWA servomotors and drives on X, Y and Z axes
• Ball bearing screws on X and Y axis
• 360° Ram rotation
• Automatic centralized lubrication
• Chips collection tank
• Quick pneumatic draw bar for clamping tool
• Possibility of mounting the Huron type bi-rotary head, model V-1 EMENA ISO40